Tel: 886-2-66296288
Fax: 886-2-29174598
URL:http://www.princeton.com.tw
Remote Control Encoder IC
PT2607
Symbol
A
Min.
-
Nom.
-
Max.
0.210
-
A1
A2
b
0.015
0.115
0.014
0.014
0.045
0.030
0.008
0.008
0.980
0.005
0.300
0.240
-
-
0.130
0.018
0.018
0.060
0.039
0.010
0.010
1.030
-
0.195
0.022
0.020
0.070
0.045
0.014
0.011
1.060
-
b1
b2
b3
c
c1
D
D1
E
0.310
0.250
0.100 bsc.
0.300 bsc.
-
0.325
0.280
-
E1
e
eA
eB
eC
L
-
-
-
0.430
0.060
0.150
0.000
0.115
-
0.130
Notes:
1. All dimensions are in INCHES.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension ”A”, ”A1” and ”L” are measured with the package seated in JEDEC Seating Plane Gauge
GS-3
4. “D”, ”D1” and “E1” dimensions do not include mold flash or protrusions. Mold flash or protrusions
shall not exceed 0.010 inch.
5. “E” and “eA” measured with the leads constrained to be perpendicular to datum -c- .
6. “eB” and “eC” are measured at the lead tips with the leads unconstrained.
7. N is the number of the terminal positions (N=20)
8. Pointed or rounded lead tips are preferred to ease insertion.
9. “b2” and “b3” maximum dimensions are not include dambar protrusions. Dambar protrusions shall
not exceed 0.010 inch (0.25mm)
10.Distance between leads including dambar protrusions to be 0.005 inch minimum.
11.Datum plane -H- coincident with the bottom of lead, where lead exits body.
12.Refer to JEDEC MS-001, Variation AD.
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT2607 V1.1
- 18 -
April, 2006
PTC [ PRINCETON TECHNOLOGY CORP ]
