Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw
2W × 2 Class AB Audio Power Amplifier
PT2303
Symbol
Min.
Max
2.65
0.30
0.51
0.32
10.50
7.60
A
A1
B
C
D
E
e
2.35
0.10
0.33
0.23
10.10
7.40
1.27 BSC
H
h
L
10.00
0.25
0.40
0o
10.65
0.75
1.27
8o
α
Notes:
1. Controlling Dimension: MILLIMETER
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension D does not include mold flash, protrusions or gate burrs. Mold flash, protrusions and
gate burrs shall not exceed 0.15mm (0.006 in) per side.
4. Dimension E does not include interlead flash or protrusions. Interlead flash and protrusions shall
not exceed 0.25 mm (0.010 in.) per side.
5. The chamfer on the body is optional. If it is not present, a visual index feature must be located within
the crosshatched area.
6. L is the length of the terminal for soldering to a substrate.
7. N is the number of terminal positions (N=16).
8. The lead width B, as measured 0.36 mm (0.014in) or greater above the seating plane, shall not
exceed a maximum value of 0.61mm (0.024in.)
9. Refer to JEDEC MS-013 Variation AA.
JEDEC is the registered trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT2303 V1.2
- 14 -
December, 2007