Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw
Remote Control Decoder
PT2272
Notes:
1. Dimensioning and tolerancing per ANSI Y14.5-1982.
2. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold Flash. protrusion or
gate burrs shall not exceed 0.15mm (0.006 in) per side.
3. Dimension “E” does not include interlead flash or protrusions. Interlead flash or protrusions shall
not exceed 0.25mm (0.010 in) per side.
4. The chamfer on the body is optional. It is not present, a visual index feature must be located within
the crosshatched area.
5. “L” is the length of the terminal for soldering to substrate.
6. “N” is the number of terminal positions. (N=18)
7. The lead width “B” as measured 0.36mm (0.014 in) or greater above the seating plane, shall not
exceed a maximum value of 0.61mm (0.24 in)
8. Controlling dimension: MILLIMETER.
9. Refer to JEDEC MS-013 Variation AB.
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT2272 V3.7
- 18 -
June, 2008
PTC [ PRINCETON TECHNOLOGY CORP ]
