Tel:886-2-66296288
Fax:886-2-29174598
URL:http://www.princeton.com.tw
Electronic Volume Controller IC
PT2256V
Notes:
1.
2.
Dimensioning and tolerancing per ANSI Y14.5M-1982.
Dimension “D” does not include mold flash, protrusions or gate burrs. Mold Flash,
protrusion or gate burrs shall not exceed 0.15 mm (0.006 in) per side.
Dimension “E” does not include interlead flash or protrusions. Interlead flash or
protrusions shall not exceed 0.25 mm (0.010 in) per side.
The chamfer on the body is optional. It is not present, a visual index feature must be
located within the crosshatched area.
3.
4.
5.
6.
7.
“L” is the length of the terminal for soldering to a substrate.
N is the number of the terminal positions (N=16)
The lead width “B” as measured 0.36 mm (0.014 in) or greater above the seating
plane, shall not exceed a maximum value of 0.61 mm (0.24 in).
Controlling dimension : MILLIMETER.
8.
9.
Refer to JEDEC MS-013, Variation AA.
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT2256V V1.2
- 16 -
August, 2006
PTC [ PRINCETON TECHNOLOGY CORP ]
