PE42720
Product Specification
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS
®
device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the specified rating.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS
®
devices are immune to latch-up.
Switching Frequency
The PE42720 has a maximum 25 kHz switching
rate.
Switching frequency describes the time duration
between switching events. Switching time is the
time duration between the point the control signal
reaches 50% of the final value and the point the
output signal reaches within 10% or 90% of its
target value. Switching time is provided in
Table 1.
Table 5. Truth Table
CTRL1
Low
Low
High
High
Note 1:
CTRL2
Low
High
Low
High
RFC – RF1
OFF
OFF
ON
N/A
1
RFC – RF2
OFF
ON
OFF
N/A
1
CTRL1 = HIGH and CTRL2 = High are not supported
Moisture Sensitivity Level
The Moisture Sensitivity Level rating for the
PE42720 in the 20-lead 4x4 mm LGA package is
MSL3.
Spurious Performance
The typical spurious performance of the PE42720
is –155 dBm.
©2010-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 4 of 11
Document No. DOC-12514-2
│
UltraCMOS
®
RFIC Solutions