PE42423
Product Specification
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS
®
device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the rating specified.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS
®
devices are immune to latch-up.
Switching Frequency
The PE42423 has a maximum 25 kHz switching
rate. Switching frequency describes the time
duration between switching events. Switching time
is the time duration between the point the control
signal reaches 50% of the final value and the point
the output signal reaches within 10% or 90% of its
target value.
Table 5. Control Logic Truth Table
LS
0
0
1
1
CTRL
0
1
0
1
RFC-RF1
off
on
on
off
RFC-RF2
on
off
off
on
Moisture Sensitivity Level
The Moisture Sensitivity Level rating for the
PE42423 in the 16-lead 3x3 mm QFN package is
MSL3.
Logic Select (LS)
The Logic Select feature is used to determine the
definition for the CTRL pin.
Figure 4. Power De-rating Curve for 600 MHz – 6 GHz
39.5
39
38.5
38
37.5
Input Power (dBm)
37
36.5
36
35.5
35
34.5
34
33.5
33
0
1
2
3
Frequency (GHz)
4
5
6
Maximum Input Power
RF Input Power, Pulsed @ 25°C Ambient
RF Input Power, Pulsed @ 85°C Ambient
RF Input Power, CW @ 25°C Ambient
RF Input Power, CW @ 85°C Ambient
©2013 Peregrine Semiconductor Corp. All rights reserved.
Page 4 of 11
Document No. DOC-11014-1
│
UltraCMOS
®
RFIC Solutions
PSEMI [ Peregrine Semiconductor ]
