PE42421
Product Specification
Table 5. Single-pin Control Logic Truth Table
Control Voltages
Pin 6 (V
DD
) = V
DD
Pin 4 (CTRL) = High
Pin 6 (V
DD
) = V
DD
Pin 4 (CTRL) = Low
Signal Path
RFC to RF2
RFC to RF1
Control Logic Input
The PE42421 is a versatile RF CMOS switch that
supports two operating control modes; single-pin
control mode and complementary-pin control
mode.
Single-pin control mode
enables the switch to
operate with a single control pin (pin 4) supporting
a +3-volt CMOS logic input, and requires a
dedicated +3-volt power supply connection on pin
6 (V
DD
). This mode of operation reduces the
number of control lines required and simplifies the
switch control interface typically derived from a
CMOS
Processor
I/O port.
Complementary-pin control mode
allows the
switch to operate using complementary control
pins CTRL and CTRL (pins 4 & 6), that can be
directly driven by +3-volt CMOS logic or a suitable
Processor
I/O port. This enables the PE42421 to
be used as a potential alternate source for SPDT
RF switch products used in positive control
voltage mode and operating within the PE42421
operating limits.
Table 6. Complementary-pin Control Logic
Truth Table
Control Voltages
Pin 6 (CTRL or V
DD
) = Low
Pin 4 (CTRL) = High
Pin 6 (CTRL or V
DD
) = High
Pin 4 (CTRL) = Low
Signal Path
RFC to RF2
RFC to RF1
©2010-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 4 of 9
Document No. 70-0396-03
│
UltraCMOS
®
RFIC Solutions