CDH3216 , CDH32 , CDH3225 ,
CDH3226 , CDH45 , CDH45A &
CDH45B
SMD Power Inductors Unshielded
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321
E-mail: mar.villarrubia@grupopremo.com Web http://www.grupopremo.com
8. Labelling
9. Reliability Test
Test item
Specification
Test condition
More than 90% of the
terminal electrode
shall be covered
Preheat : 150±25% for 60 seconds
Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent
Solder temp. : 235±5ºC
Solderability
with fresh solder
Flux : Rosin
Dip time : 4±1 seconds
Room temp.
15 minutes
-25±2ºC
30 minutes
Thermal shock test
(Temp. cycle)
Inductance shall
not change more
than ±10%
Room temp.
15 minutes
85±2ºC
30 minutes
Total : 50 cycles
Temperature : 40±2ºC
Humidity : 90 ~ 95%
Humidity
Resistance test
Applied current : Per specifications
Time : 500 hours
High temp.
Resistance test
Temperature : 105±2ºC
Applied current : Per specifications
Time : 500 hours
10. Edition Control
Edition
Date
31/08/06
Change description
Update Specification
Made by
Pablo Pozo
1st
10
PREMO
SMD Power Inductors
All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.