TOP242-250
TO-262-7C
.045 (1.14)
.055 (1.40)
.390 (9.91)
.420 (10.67)
.165 (4.17)
.185 (4.70)
.055 (1.40)
.066 (1.68)
.326 (8.28)
.336 (8.53)
.495 (12.56)
REF.
7° TYP.
.595 (15.10)
REF.
.795 (20.18)
REF.
.080 (2.03)
.120 (3.05)
PIN 1 & 7
PIN 2 & 4
.068 (1.73) MIN
.024 (.61)
.040 (1.02)
.060 (1.52)
PIN 1
.010 (.25) M
.034 (.86)
.012 (.30)
.024 (.61)
.040 (1.06)
.060 (1.52)
.050 (1.27) BSC
.150 (3.81) BSC
.190 (4.83)
.210 (5.33)
.050 (1.27)
Notes:
.050 (1.27)
1. Controlling dimensions are inches. Millimeter
dimensions are shown in parentheses.
2. Pin numbers start with Pin 1, and continue
from left to right when viewed from the front.
3. Dimensions do not include mold flash or
other protrusions. Mold flash or protrusions
shall not exceed .006 (.15mm) on any side.
4. Minimum metal to metal spacing at the pack-
age body for omitted pin locations is .068
inch (1.73 mm).
.050 (1.27)
.050 (1.27)
.180 (4.58)
.200 (5.08)
.100 (2.54)
PIN 1
PIN 7
.150 (3.81)
5. Position of terminals to be measured at a
location .25 (6.35) below the package body.
6. All terminals are solder plated.
.150 (3.81)
MOUNTING HOLE PATTERN
F07C
PI-2757-122004
M
50 12/04
POWERINT [ Power Integrations ]
