TNY284-290
™
TinySwitch-4 Family
Energy-Efficient, Off-Line Switcher With
Line Compensated Overload Power
Product Highlights
+
+
Lowest System Cost with Enhanced Flexibility
•ꢀ 72ꢀ V rated MOSFET
DC
Output
•ꢀ Increases BV de-rating margin
Wide-Range
High-Voltage
DC Input
•ꢀ Line compensated overload power – no additional components
•ꢀ Dramatically reduces max overload variation over universal
input voltage range
•ꢀ ±ꢀ5 turn on UV threshold: line voltage sense with single
external resistor
D
S
EN/UV
BP/M
TinySwitch-4
•ꢀ Simple ON/OFF control, no loop compensation needed
•ꢀ Selectable current limit through BP/M capacitor value
•ꢀ Higher current limit extends peak power or, in open frame
applications, maximum continuous power
•ꢀ Lower current limit improves efficiency in enclosed
adapters/chargers
PI-6578-101411
Figure 1. Typical Standby Application.
•ꢀ Allows optimum TinySwitch-4 choice by swapping devices
with no other circuit redesign
•ꢀ Tight I2f parameter tolerance reduces system cost
•ꢀ Maximizes MOSFET and magnetics utilization
•ꢀ ON-time extension – extends low-line regulation range/hold-up
time to reduce input bulk capacitance
SO-8C (D Package)
DIP-8C (P Package)
eSOP-12B (K Package)
Figure 2. Package Options.
•ꢀ Self-biased: no bias winding or bias components
•ꢀ Frequency jittering reduces EMI filter costs
•ꢀ Pin-out simplifies heat sinking to the PCB
•ꢀ SOURCE pins are electrically quiet for low EMII
Output Power Table
230 VAC 1ꢀ5
8ꢀ-26ꢀ VAC
Product3
Peak or
Open
Peak or
Adapter1
Adapter1
Open
Frame2
Frame2
Enhanced Safety and Reliability Features
•ꢀ Accurate hysteretic thermal shutdown protection with auto-
matic recovery eliminates need for manual reset
•ꢀ Auto-restart delivers <35 of maximum power in short-circuit
and open loop fault conditions
•ꢀ Output overvoltage shutdown with optional Zener
•ꢀ Fast AC reset with optional UV external resistor
•ꢀ Very low component count enhances reliability and enables
single-sided printed circuit board layout
•ꢀ High bandwidth provides fast turn-on with no overshoot and
excellent transient load response
•ꢀ Extended creepage between DRAIN and all other pins improves
field reliability
TNY284P/D/K
TNY285P/D
TNY285K
TNY286P/D
TNY286K
TNY287D
TNY287P
TNY287K
TNY288P
TNY288K
TNY289P
TNY289K
TNY290P
TNY290K
6 W
8.ꢀ W
11 W
10 W
13.ꢀ W
11.ꢀ W
13 W
18 W
16 W
23 W
18 W
2ꢀ W
20 W
28 W
11 W
1ꢀ W
ꢀ W
6 W
8.ꢀ W
11.ꢀ W
11.ꢀ W
1ꢀ W
1ꢀ W
7.ꢀ W
7 W
19 W
19 W
9.ꢀ W
7 W
1ꢀ W
23.ꢀ W
23.ꢀ W
23.ꢀ W
28 W
18 W
8 W
18 W
11 W
10 W
14.ꢀ W
12 W
17 W
14 W
20 W
16 W
21.ꢀ W
21.ꢀ W
2ꢀ W
28 W
EcoSmart™– Extremely Energy Efficient
•ꢀ Easily meets all global energy efficiency regulations
•ꢀ No-load <30 mW with bias winding, <1ꢀ0 mW at 26ꢀ VAC
without bias winding
•ꢀ ON/OFF control provides constant efficiency down to very light
loads – ideal for mandatory CEC regulations and EuP standby
requirements
32 W
32 W
2ꢀ W
36.ꢀ W
36.ꢀ W
28.ꢀ W
28.ꢀ W
Table 1. Output Power Table.
Notes:
1. Minimum continuous power in a typical non-ventilated enclosed adapter
measured at +ꢀ0 °C ambient. Use of an external heat sink will increase power
capability.
2. Minimum peak power capability in any design or minimum continuous power in
an open frame design (see Key Applications Considerations).
3. Packages: D: SO-8C, P: DIP-8C, K: eSOP-12B. See Part Ordering Information.
Applications
•ꢀ PC Standby and other auxiliary supplies
•ꢀ DVD/PVR and other low power set top decoders
•ꢀ Supplies for appliances, industrial systems, metering, etc
•ꢀ Chargers/adapters for cell/cordless phones, PDAs, digital
cameras, MP3/portable audio, shavers, etc.
www.powerint.com
September 2012