LNK454/456-458/460
eDIP-12 (V Package)
0.004 [0.10] C A
2
Seating Plane
C
0.400 [10.16]
0.016 [0.41]
0.011 [0.28]
Pin #1 I.D.
(Laser Marked)
0.316 [8.03]
Ref.
12×
A
0.010 [0.25] Ref.
0.059 [1.50]
Ref, typ.
2X
6
1
1
2
3
4
5
6
0.004 [0.10] C B
Pin #1 I.D.
(Laser Marked)
7
0.412 [10.46]
Ref.
2
0.400 [10.16]
8
0.213 [5.41]
Ref.
0.350 [8.89]
0.306 [7.77]
Ref.
0.059 [1.50]
Ref, typ.
0.436 [11.08]
0.406 [10.32]
B
12 11 10
9
8
7
7
12
3
12×
4
0.023 [0.58]
0.018 [0.46]
Detail A
°
°
4
5
TOP VIEW
0.104 [2.65] Ref.
0.010 [0.25] M C A B
BOTTOM VIEW
END VIEW
0.092 [2.34]
0.086 [2.18]
0.356 [9.04]
Ref.
0.019 [0.48]
Ref.
0.049 [1.23]
0.046 [1.16]
0.022 [0.56]
Ref.
0.192 [4.87]
Ref.
H
0.031 [0.80]
0.028 [0.72]
0.020 [0.51]
Ref.
0.070 [1.78]
0.028 [0.71]
Ref.
SIDE VIEW
DETAIL A (Not drawn to scale)
Notes:
1. Dimensioning and tolerancing per
ASME Y14.5M-1994.
Mounting
Hole Pattern
Dimensions
0.07 [1.78]
0.03 [0.76]
2. Dimensions noted are determined
at the outermost extremes of the plastic
body exclusive of mold flash, tie bar
burrs, gate burrs, and interlead flash,
but including any mismatch between the
top and bottom of the plastic body. Maximum
mold protrusion is 0.007 [0.18] per side.
3. Dimensions noted are inclusive of plating
thickness.
4. Does not include inter-lead flash or
protrusions.
0.400 [10.16]
5. Controlling dimensions in inches [mm].
6. Datums A & B to be determined at Datum H.
7. Measured with the leads constrained to be
perpendicular to Datum C.
8. Measured with the leads unconstrained.
9. Lead numbering per JEDEC SPP-012.
Drill Hole
Round Pad 0.05 [1.27]
Solder Mask 0.056 [1.42]
0.03 [0.76]
PI-5556-110210
17
www.powerint.com
Rev. A 11/01/10