InnoSwitch-CH
Revision Notes
Date
A
B
Initial Release.
11/14
Added Note 4 to Table 1, updated Auto-Restart section, added VFB(OFF) to Parameter Table, new Figure 23, added Part
Ordering Table and added Notes 6 and 7 to Absolute Maximum Ratings table.
01/15
Corrected secondary auto-restart from relative specification on the FEEDBACK pin to absolute threshold on the VOUT
pin, that was incorrectly documented in previous revision. Updated ISR(PD), ISR(PU) and VBPP limits based on high volume
production data.
C
D
E
05/15
07/15
08/15
Added extra information related to Cable Drop Compensation (CDC) function on page 5.
Updated in line with UL Report E358471. Increased Storage, Operating Junction, and Ambient Temperatures and
Secondary-Side Current Rating Parameters. Previous Note 7 in Abs Max Ratings Table is no longer required and
deleted. Updated Figure 5, page 1 and RDS(ON) Condition parameter.
Corrected Bottom (Left side) of PCB layout in Figure 20, SOURCE (S) Pin description on page 3, added ESD table and
eSOP-R16B Package Marking.
F
11/15
G
H
I
Modified page 1 sub-header text.
11/18/15
12/04/15
04/17
Corrected OUTPUT VOLTAGE Pin Auto-Restart Threshold section. Improved VOUT(AR) limits tolerance, 3.5 V Max.
Added Pin 8 and Pin 9 information under Pin Functional Description on page 3.
Corrected error in Figure 4. Updated text and added 4 new waveform schematics in Bias Winding and External Bias
Circuit section. Added 1 new figure in Applications Example section.
J
10/17
25
Rev. J 10/17
www.power.com
POWERINT [ Power Integrations ]
