17-May-04
EPR-16 – LinkSwitch 2.75 W Charger/Adapter
10 Appendix A – EP-16 Enclosure Opening Procedures
10.1 Method 1 - Non-destructive
Step 1:
Insert thin bladed
Step 2:
Insert thin bladed
screwdrivers into slots in
the AC connect portion of
case. Make certain
screwdriver is on top of
plastic tab.
screwdriver between two
halves of the case and
twist. Case will pop apart.
Repeat on other side and
pull to separate.
Figure 28 – Non-destructive Opening of EP-16 Case.
10.2 Method 2 - Destructive
Step 1:
Using diagonal cutter clip plastic
and lift up as shown. Repeat on
both sides of case (4 places). Case
will then separate.
Figure 29 - Destructive Opening of EP-16 Case.
Power Integrations
Page 27 of 36
Tel: +1 408 414 9660 Fax: +1 408 414 9760
www.powerint.com
POWERINT [ Power Integrations ]
