Figure 4. GUI DPM Advanced Programming Dialog
10.1.2
DPM Registers
The DPM setup registers occupy 70 bytes and contain all necessary information to set up the DPM functionality,
define POL converters and Auxiliary Devices, group membership and behavior, margining, interrupt configurations,
etc. they DPM registers are listed in. The table relates to the DPM model number DM7332 capable of supporting up
to 32 POL converters. For other DPM models some of the registers and/or bits in the registers are not activated
depending on the number of supported POLs/Groups/Interrupts/Parallel Buses for the specific DPM. Writing into
an unsupported register or bit will have no effect, reading from an unsupported register or bit will return an error code
(0x00).
ZD-00896 Rev. 5.2, 9-Apr-13
www.power-one.com
Page 10 of 36
POWER-ONE [ POWER-ONE ]
