DATA SHEET
Notes:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Maximum outputs for each output. Max power rating should not be exceeded.
Output noise measurement is made with a 20 MHz bandwidth using a 6” twisted pair, terminated with a 10 uF tantalum
capacitor in parallel with a 0.1 uF ceramic capacitor.
Safety Approved: 47 to 63 Hz.
Minimum load specified to meet cross regulation.
Specifications are for nominal input voltage, 25° C and max load unless otherwise stated.
Class 1 models have Earthing tab J4. Class 2 models (-2 suffix) have no Earthing tab.
Ripple and Noise may be 3% at initial start-up at -20 C.
Specifications subject to change without notice.
Warranty 2 years.
General Specifications
PARAMETER
Hold Up Time
MTBF
Switching Frequency
Isolation Voltage
Weight
DESCRIPTION/CONDITION
6 mSec
>100 khrs
67 kHz Typical
Input to Output: Min 4242 Vdc
150 g (0.33 lbs)
120 / 230 Vac input
MIL-HDBK-217F
Input to Ground: Min 2120 Vdc
Environmental
PARAMETER
Operating Temperature
Humidity
Altitude
Conducted Emissions:
Harmonic current correction:
Radiated Emissions
Static Discharge
Conducted immunity:
DESCRIPTION/CONDITION
Operating
Storage
95%
Operating 10,000 ft.
EN55022, FCC part 15- B
EN61000-3-2, Class A
EN55011-B, FCC part 15-B
EN61000-4-2 Level 3
EN61000-4-6
-20 to 70° C. See derating chart below.
-40 to +85° C.
Non Condensing
Non-operating 40,000 ft
To be controlled in end system
2, 3, 4, 5 Level 3
Safety
PARAMETER
EN / UL / CSA
DESCRIPTION/CONDITION
EN60950-1+A12:2011, IEC60950-1 2
nd
+A1 2009, CSA-22.2 No 60950-01-07+ A1,
UL60950-1-2011
BCD.00281_AA_September-18-2013
3
www.power-one.com
POWER-ONE [ POWER-ONE ]
