DATA SHEET
Figure 1 Output Power Vs. Temperature
Figure 2 Dimension Drawing (Top and Side View)
Mechanical
INPUT = J1
Pin 1: AC Neutral
Pin 2: AC Line
Mating Connector:
Molex: 09-50-3031
Pins: 08-50-0106
EARTHING TAB = J4
Molex: 19705-4301
DC OUTPUT = J2
Pin 1 = RTN
Pin 2 = RTN
Pin 3 = RTN
Pin 4 = Vout
Pin 5 = Vout
Pin 6 = Vout
SIGNALS & AUX POWER= J3
Pin 1 = + Remote Sense
Pin 2 = Vfan (+12 V)
Pin 3 = - Remote Sense
Pin 4 = Inhibit
Pin 5 = Vs/b (5 Vdc)
Pin 6 = Return (Signal)
Pin 7 =Power Fail
Pin 8 = Power Good
Mating Connector:
Molex: 190030001
Mating Connector:
JST VHR-6M, Pins: SVH-41T-
P1.1. AWG #20 to #16
Mating Connector:
Molex: 22-01-2087, Pins: 08-50-0113
Copyright © 2010 Power-One Inc. All rights reserved. Words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the
trademarks and service marks of Power-One Inc. in the U.S. and other countries. All other product or service names are the property of their respective holders.
Power-One products are protected under numerous U.S. and foreign patents and pending applications, maskwork rights, and copyrights. Power-One reserves the
right to make changes to any products and services at any time without notice. Power-One assumes no responsibility or liability arising out of the application or use
of any information, product, or service described herein except as expressly agreed to in writing by Power-One Inc.
NUCLEAR AND MEDICAL APPLICATIONS
- Power-One products are not designed, intended for use in, or authorized for use as critical components in life sup-
port systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of
Power-One, Inc.
TECHNICAL REVISIONS
- The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufac-
tured. Specifications are subject to change without notice.
ABC201 Series
4
www.power-one.com
POWER-ONE [ POWER-ONE ]
