PO74G304A
3.3V 1:4 CMOS Clock Buffered Driver
07/31/06
700MHz TTL/CMOS Potato Chip
Power Supply Characteristics
Symbol
Description
Test Conditions (1)
Min
Typ
Max Unit
Quiescent Power Supply Current
Vcc=Max, Vin=Vcc or GND
IccQ
-
0.1
30
uA
Notes:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at Vcc = 3.3V, 25°C ambient.
3. This parameter is guaranteed but not tested.
4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
Capacitance
Parameters (1)
Description
Test Conditions
Vin = 0V
Typ
Max
Unit
pF
Input Capacitance
Output Capacitance
3
4
Cin
Cout
Vout = 0V
pF
-
6
Notes:
1 This parameter is determined by device characterization but not production tested.
Switching Characteristics
Symbol
Description
Test Conditions (1)
CL = 15pF
Max
Unit
Propagation Delay A to Bn
Propagation Delay A to Bn
Rise/Fall Time
tPLH
tPHL
2.0
ns
CL = 15pF
2.0
0.8
ns
ns
ps
ps
0.8V – 2.0V
tr/tf
Pulse Skew (Same Package)
Output Pin to Pin Skew (Same Package)
Output Skew (Different Package)
Input Frequency
CL = 15pF, 125MHz
CL = 15pF, 125MHz
CL = 15pF, 125MHz
CL = 50pF
150
100
400
100
tsk(p)
tsk(o)
tsk(pp)
fmax
fmax
fmax
fmax
Notes:
ps
MHz
MHz
MHz
MHz
Input Frequency
CL =15pF
450
650
700
Input Frequency
CL = 5pF
Input Frequency
CL = 2pF
1. See test circuits and waveforms.
2. tpLH, tpHL, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested.
3. Airflow of 1m/s is recommended for frequencies above 133MHz
3
Copyright © 2005-2006, Potato Semiconductor Corporation