Model 1825, 4897, 4899, 6545
Standard Banana Plug, Solderless and Stackable
Features
Designed to fit on the end of any 22 AWG to
18 AWG wire.
Cross hole wire entry fits wires up to .12”
(3mm) diameter.
Available with tarnish resistant nickel or gold
plating for very low contact resistance.
Model 4899 is rated to temperatures up to
+302°F (+150°C).
Set screw simplifies assembly of test leads
and jumpers by using a flat blade
screwdriver.
Fits standard panel and binding post banana
jacks .161” to .166” (4,0mm to 4,2mm)
diameter.
Materials
Banana Jack: Beryllium Copper, Gold Plated
Banana Plug: Body – Brass, Nickel Plated (Model 4897 is Gold
Plated)
Spring – Beryllium Copper, Nickel Plated (Model 4897 Gold Plated)
Polypropylene (Model 4899 is Polyphenylene Sulfide)
Steel, Zinc Plated, 8-32 Single Slot
Insulation:
Set Screw:
Ratings
Voltage:
For CE compliance and for personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc.
Maximum voltage for hands free use in controlled testing environments: 5000 Vrms Max.
Do not use on circuits where transient stresses can exceed the rated voltage.
15 Amps
Current:
Maximum Operating Temperature:
+122ºF (+50ºC) max. (Model 4899: +302ºF (+150ºC) max.)
Ordering Information
Model: 1825-color
Nickel Plated Banana with Polypropylene Insulation
Color: 0=Black, 1=Brown, 2=Red, 3=Orange, 4=Yellow, 5=Green, 6=Blue, 7=Violet, 8=Gray, 9=White,
02=set of Black and Red
Ordering example:
1825-5 (1825 with Green Polypropylene Insulation)
Model: 4897-0 Gold Plated Banana Plug with Polypropylene Black Insulation
Model: 4897-2 Gold Plated Banana Plug with Polypropylene Red Insulation
Model: 4899-0 Nickel Plated Banana with High Temperature Black Insulation (Polyphenylene Sulfide)
Model: 4899-6 Nickel Plated Banana with High Temperature Blue Insulation (Polyphenylene Sulfide)
Model: 6545 Package of ten 1825, one of each color.
Model: 4914 Replacement Set Screws, package of 100.
USA:
Sales: 800-490-2361
Technical Support: technicalsupport@pomonatest.com
Fax: 425-446-5844
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
Copyright © 2010 D1093787 Rev. 101
Page 1 of 1
POMONA [ POMONA ELECTRONICS ]