Pomona®
Model 1326
Double Banana Plug One End Only
Part Number
1326-A-60
1326-C-60
Schematic
Cable Type
Twisted Pair .250” (6,35 mm)
RG58C/U
Diameter
Impedance
Length
2
1
-
60” (152,4 cm)
60” (152,4 cm)
.195” (4,95 mm) 50 Ohms
FEATURES:
·
This double banana plug cable is designed to be
used with all standard .166” (4mm) diameter
banana jacks.
·
The one-piece Beryllium Copper leaf spring
with hard nickel plating is swaged into the
solid brass banana plug body.
·
These jacks are usually spaced at .75” (19mm)
apart. Pomona’s double banana plugs can be
used with most digital multimeters that have the
common and volt-ohm jacks at the standard
spacing.
MATERIALS:
The plug is insert molded with black polypropylene
(1326-C-).
The plug is insert molded with gray polypropylene (1326-
A-).
·
·
·
This cable is also suited for use with power
supplies that have binding post outputs
The Pomona Banana Plug is well known for
durability and reliability.
We take considerable pride in the materials and
workmanship that go into this plug.
RATINGS:
Operating Temperature: +55° C (+131° F) Max.
1326-A 300VAC/424VDC
1326-C 500VRMS
ORDERING INFORMATION: Model 1326
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
PomonaACCESS 90503 (800) 444-6785 or (425) 446-6010
Sales: 800-490-2361 Fax: 888-403-3360
Technical Assistance: 800-241-2060
SY/EH/LS
More drawings available at www.pomonaelectronics.com
S:\Engineering\Release\DataSheets\FlukeDataSheet\d1326_1_01.doc
Page 1 of 1