TISP3070H3SL THRU TISP3095H3SL, TISP3125H3SL THRU TISP3210H3SL
TISP3250H3SL THRU TISP3350H3SL
DUAL BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS
JANUARY 1999 - REVISED MAY 1999
absolute maximum ratings, T
A
= 25°C (unless otherwise noted)
RATING
‘3070
‘3080
‘3095
‘3125
‘3135
Repetitive peak off-state voltage, (see Note 1)
‘3145
‘3180
‘3210
‘3250
‘3290
‘3350
Non-repetitive peak on-state pulse current (see Notes 2, 3 and 4)
2/10 µs (GR-1089-CORE, 2/10 µs voltage wave shape)
8/20 µs (IEC 61000-4-5, 1.2/50 µs voltage, 8/20 current combination wave generator)
10/160 µs (FCC Part 68, 10/160 µs voltage wave shape)
5/200 µs (VDE 0433, 10/700 µs voltage wave shape)
0.2/310 µs (I3124, 0.5/700 µs voltage wave shape)
5/310 µs (ITU-T K20/21, 10/700 µs voltage wave shape)
5/310 µs (FTZ R12, 10/700 µs voltage wave shape)
5/320 µs (FCC Part 68, 9/720 µs voltage wave shape)
10/560 µs (FCC Part 68, 10/560 µs voltage wave shape)
10/1000 µs (GR-1089-CORE, 10/1000 µs voltage wave shape)
Non-repetitive peak on-state current (see Notes 2, 3 and 5)
20 ms (50 Hz) full sine wave
16.7 ms (60 Hz) full sine wave
1000 s 50 Hz/60 Hz a.c.
Initial rate of rise of on-state current,
Junction temperature
Storage temperature range
Exponential current ramp, Maximum ramp value < 200 A
di
T
/dt
T
J
T
stg
I
TSM
55
60
1
400
-40 to +150
-65 to +150
A/µs
°C
°C
A
I
TSP
500
300
250
220
200
200
200
200
160
100
A
V
DRM
SYMBOL
VALUE
± 58
± 65
± 75
±100
±110
±120
±145
±160
±190
±220
±275
V
UNIT
NOTES: 1. See Figure 9 for voltage values at lower temperatures.
2. Initially the TISP3xxxH3SL must be in thermal equilibrium.
3. These non-repetitive rated currents are peak values of either polarirty. The rated current values may be applied to the R or T
terminals. Additionally, both R and T terminals may have their rated current values applied simultaneously (in this case the G
terminal return current will be the sum of the currents applied to the R and T terminals). The surge may be repeated after the
TISP3xxxH3SL returns to its initial conditions.
4. See Figure 10 for impulse current ratings at other temperatures. Above 85 °C, derate linearly to zero at 150 °C lead temperature.
5. EIA/JESD51-2 environment and EIA/JESD51-3 PCB with standard footprint dimensions connected with 5 A rated printed wiring
track widths. See Figure 8 for the current ratings at other durations. Figure 8 shows the R and T terminal current rating for
simulateous operation. In this condition, the G terminal current will be 2xI
TSM(t)
, the sum of the R and T terminal currents. Derate
current values at -0.61 %/°C for ambient temperatures above 25 °C.
PRODUCT
2
INFORMATION
POINN [ POWER INNOVATIONS LTD ]
