PM7385 FREEDM-84A672
DATA SHEET
PMC-1990114
ISSUE 6
84 LINK, 672 CHANNEL FRAME ENGINE AND DATA LINK MANAGER
WITH ANY-PHY PACKET INTERFACE
RWB:
The indirect access control bit (RWB) selects between a configure (write) or
interrogate (read) access to the channel provision RAM. The address to the
channel provision RAM is constructed by concatenating the TSLOT[4:0] and
LINK[6:0] bits. Writing a logic zero to RWB triggers an indirect write
operation. Data to be written is taken from the PROV, the CDLBEN and the
CHAN[9:0] bits of the RCAS Indirect Channel Data register. Writing a logic
one to RWB triggers an indirect read operation. Addressing of the RAM is the
same as in an indirect write operation. The data read can be found in the
PROV, the CDLBEN and the CHAN[9:0] bits of the RCAS Indirect Channel
Data register.
BUSY:
The indirect access status bit (BUSY) reports the progress of an indirect
access. BUSY is set high when this register is written to trigger an indirect
access, and will stay high until the access is complete. At which point, BUSY
will be set low. This register should be polled to determine when data from an
indirect read operation is available in the RCAS Indirect Channel Data register
or to determine when a new indirect write operation may commence.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
95
PMC [ PMC-SIERRA, INC ]
