PM7340 S/UNI-IMA-8
PRELIMINARY
INVERSE MULTIPLEXING OVER ATM
DATA SHEET
PMC-2001723
ISSUE 3
INVERSE MULTIPLEXING OVER ATM
mode) to be sent in the outgoing ICP cells. The TRL is also
used to control the TX IDCC. This command also causes the
SCCI field in the next outgoing ICP cell to increase.
Parameters
Group Tag and LID for new TRL
Pre-requisite None.
Restriction
It is up to the user to pick a valid TRL to satisfy the
requirement in the IMA spec. At least, a TRL that is currently
configured to be in the group should be selected; otherwise
the group will not be able to operate normally.
12.Read_event
Function
Read and clear the latched event status of the specified
group and all its' links.
The result read from the internal context memory is stored in
Cmd_rd_data00 through cmd_rd_data1F. Refer to the
“registers” section for further details.
Parameters
Group Tag
Pre-requisite None.
Restriction
13.Read_delay
Function
This command will be rejected on Deleted groups.
Read all the DCB write pointers and link defect status of all
links in the specified group.
The result is stored in Cmd_rd_data00 through
cmd_rd_data1F. Refer to the “registers” section for further
details.
Parameters
Group Tag
Pre-requisite None.
Restriction None.
14.Adjust_delay
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
273
PMC [ PMC-SIERRA, INC ]
