STANDARD PRODUCT
PM5365 TEMAP
DATASHEET
PMC-1991148
ISSUE 3
HIGH DENSITY VT/TU MAPPER
AND M13 MULTIPLEXER
(See Note 3 and 4)
TS
TH
TP
TP
TP
TDATI to TGAPCLK Set-up Time
3
2
ns
ns
ns
ns
ns
ns
ns
TGAP
TGAP
TCLK
(See Notes 1 and 5)
TDATI to TGAPCLK Hold Time
(See Note 2 and 5)
TICLK Edge to TCLK Edge Prop Delay
2
13
5
(See Notes 3 and 4)
TCLK Edge to TPOS/TDAT Prop Delay
(See Notes 3 and 4)
-1
-1
2
TPOS
TNEG
TPOS2
TCLK Edge to TNEG/TMFP Prop Delay
5
(See Notes 3 and 4)
tP
TP
TICLK High to TPOS/TDAT Prop Delay
(See Notes 3 and 4)
13
13
TICLK High to TNEG/TMFP Prop Delay
2
TNEG2
(See Notes 3 and 4)
Notes on DS3 Transmit Interface Timing:
1. When a set-up time is specified between an input and a clock, the set-up
time is the time in nanoseconds from the 1.4 Volt point of the input to the 1.4
Volt point of the clock.
2. When a hold time is specified between an input and a clock, the hold time is
the time in nanoseconds from the 1.4 Volt point of the clock to the 1.4 Volt
point of the input.
3. Output propagation delay time is the time in nanoseconds from the 1.4 Volt
point of the reference signal to the 1.4 Volt point of the output.
4. Maximum and minimum output propagation delays are measured with a 20
pF load on all the outputs.
5.
Setup and hold times relative to TGAPCLK are measured with a 20 pF load on
aTGAPCLK.
Proprietary and Confidential to PMC-Sierra, Inc. and for its Customers’ Internal Use
210
PMC [ PMC-SIERRA, INC ]
