PM5363 TUPP+622
TUPP+622
DATASHEET
PMC-1981421
ISSUE 4
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR FOR 622 MBIT/S
INTERFACES
Pin Name
Type
Pin
No.
Function
OTPL[3]
Output R22 The outgoing tributary payload active #3
(OTPL[3]) signal marks the bytes carrying the
tributary payload for the STM-1 #3 stream.
In outgoing STM-1 (STS-3) interface mode
(OHSMODEB set high), OTPL[3] is set high to
mark each tributary payload byte on the
OD[23:16] bus. OTPL[3] is updated on the rising
edge of SCLK.
In outgoing STM-4 (STS-12) interface mode
(OHSMODEB set low), OTPL[3] is invalid.
AB15
OTPL[4]
Output
The outgoing tributary payload active #4
(OTPL[4]) signal marks the bytes carrying the
tributary payload for the STM-1 #4 stream.
In outgoing STM-1 (STS-3) interface mode
(OHSMODEB set high), OTPL[4] is set high to
mark each tributary payload byte on the
OD[31:24] bus. OTPL[4] is updated on the rising
edge of SCLK.
In outgoing STM-4 (STS-12) interface mode
(OHSMODEB set low), OTPL[4] is invalid.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
58