PMC-Sierra, Inc.
PM5356
S/UNI-622-MAX
DATASHEET
S/UNI-622-MAX
PMC-1980589
ISSUE 5
SATURN USER NETWORK INTERFACE (622-MAX)
Register 0x33 (EXTD=0): RPOP Interrupt Enable
Bit
Bit 7
Type
Function
Default
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
PSLE
Reserved
LOPE
0
0
0
0
0
0
0
0
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Reserved
PAISE
PRDIE
BIPEE
FEBEE
NOTE: To facilitate additional register mapping, shadow registers have been added to registers
0x30, 0x31 and 0x33. These shadow registers are accessed in the same way as the normal
registers.
The EXTD (extend register) bit must be set in register 0x36 to allow switching between accessing
the normal registers and the shadow registers.
This register allows interrupt generation to be enabled for path level alarm and error events.
FEBEE:
The FEBEE bit is the interrupt enable for path FEBEs. When FEBEE is a logic one, an
interrupt is generated when a path FEBE is detected.
BIPEE:
The BIPEE bit is the interrupt enable for path BIP-8 errors. When BIPEE is a logic one, an
interrupt is generated when a B3 error is detected.
PRDIE:
The PRDIE bit is the interrupt enable for path RDI. When PRDIE is a logic one, an interrupt
is generated when the path RDI state changes.
PAISE:
The PAISE bit is the interrupt enable for path AIS. When PAISE is a logic one, an interrupt is
generated when the path AIS state changes.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
122