STANDARD PRODUCT
PM4351 COMET
DATA SHEET
PMC-1970624
ISSUE 10
COMBINED E1/T1 TRANSCEIVER
Register 01DH: RX-ELST Interrupt Enable/Status
Bit
Type
Function
Default
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Unused
Unused
Unused
Unused
Unused
SLIPE
X
X
X
X
X
0
R/W
R
SLIPD
SLIPI
X
X
R
SLIPE:
The SLIPE bit position is an interrupt enable that when set, enables the INTB
output to assert low when a slip occurs. When the block is reset the SLIPE
bit position is cleared and interrupt generation is disabled.
SLIPD:
The SLIPD bit indicates the direction of the last slip. If the SLIPD bit is a
logic 1 then the last slip was due to the frame buffer becoming full; a frame
was deleted. If the SLIPD bit is a logic 0 then the last slip was due to the
frame buffer becoming empty; a frame was duplicated.
SLIPI:
The SLIPI bit is set if a slip occurred since the last read of this register. The
SLIPI bit is cleared upon reading this register.
PROPRIETARY AND CONFIDENTIAL
126
PMC [ PMC-SIERRA, INC ]
