欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM3350-SW 参数 Datasheet PDF下载

PM3350-SW图片预览
型号: PM3350-SW
PDF下载: 下载PDF文件 查看货源
内容描述: 8端口以太网交换机 [8 PORT ETHERNET SWITCH]
分类和应用: 以太网以太网:16GBASE-T
文件页数/大小: 224 页 / 990 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM3350-SW的Datasheet PDF文件第13页浏览型号PM3350-SW的Datasheet PDF文件第14页浏览型号PM3350-SW的Datasheet PDF文件第15页浏览型号PM3350-SW的Datasheet PDF文件第16页浏览型号PM3350-SW的Datasheet PDF文件第18页浏览型号PM3350-SW的Datasheet PDF文件第19页浏览型号PM3350-SW的Datasheet PDF文件第20页浏览型号PM3350-SW的Datasheet PDF文件第21页  
PM3350 ELAN 8 X10  
ELAN 8X10  
DATA SHEET  
PMC-970109  
ISSUE 3  
8 PORT ETHERNET SWITCH  
Spanning tree bridging capabilities  
The ELAN 8x10 optionally implements the 802.1d spanning tree protocol, allowing it to  
interoperate with IEEE-standard transparent bridges. The spanning tree protocol is  
supported by the on-chip Switch Processor unit, and does not require an external CPU  
for implementation.  
Management and monitoring support  
The ELAN 8x10 maintains full RMON port and host statistics for all ports and all learned  
MAC addresses at wire rates. These statistics may be retrieved either in-band (via  
SNMP agent) or out-of-band (via the expansion bus).  
The ELAN 8x10 implements an optional on-chip SNMP agent on top of an integral  
UDP/IP protocol stack, supporting SNMP and the RFC1493 bridge MIB. When multiple  
ELAN 8x10 chips are present in a system, they may be configured to intercommunicate  
and create a distributed MIB in a transparent manner. Alternatively, the system vendor  
may elect to disable the SNMP agent and access the ELAN 8x10 statistics and  
configuration variables directly from the expansion port.  
Status codes may be displayed on a set of LEDs (Light Emitting Diodes) during self-test  
and operation at the system implementer's discretion. These status codes are output to  
a register mapped into the ELAN 8x10 memory data bus at a specific address location.  
Device failure during self-test, or specific operating conditions, may be displayed using  
front-panel LEDs connected to the register.  
Autoconfiguration via Local PROM/EEPROM  
The ELAN 8x10 will automatically self-configure upon power-up using user-defined  
parameters supplied in an external EPROM or EEPROM. The EPROM/ EEPROM may  
be connected to the memory bus and mapped to any address range; the ELAN 8x10  
will automatically locate the EPROM or EEPROM and load the configuration  
parameters from it. The ELAN 8x10 also contains hardware that enables it to write to  
standard 3.3-volt EEPROM devices, thus permitting configuration information to be  
changed dynamically.  
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND PMC-SIERRA, INC. CUSTOMERS ONLY  
15  
 复制成功!