s
PCI
CompactPCI Hot Swap Adapter Card
Hot Swap capability is a requirement for
today's CompactPCI systems.
The PCI 9030 provides an
excellent solution because it is
Memory
I/O
the industry's first Hot Swap
Ready Target chip. SMARTarget
Technology will ensure a high
performance Hot Swap imple-
32-bit 60MHz Local Bus
mentation. The PCI 9030 is a
PCI 9030
PICMG v2.1 Hot Swap Ready
SMARTarget
™
target device including the
Device
( BGA)
following features:
s
PCI specification v2.1
or better
s
Tolerant of Vcc from early power
Figure 3.
PMC Card
s
Tolerant of asynchronous reset
s
Tolerant of precharge voltage
s
3.3V, 5V Tolerant PCI Signaling enables
s
Has limited I/O pin leakage at
universal PCI adapters
precharge voltage
s
3.3V CMOS device in space saving 180
s
Incorporates the Hot Swap
pin BGA or 176-PQFP
Control/Status Register (HS_CSR)
PCI 9030 Applications
s
Incorporates an Extended Capability
PCI Target Adapter Card
Pointer (ECP) mechanism
The PCI 9030 can be used in a wide vari-
s
Incorporates added resources for soft-
ety of applications in networking, telecom,
ware control of ENUM#, the ejector
switch, and the status LED which
imaging, industrial and storage. The PCI
indicates to the user insertion /removal
9030 simplifies migration of legacy designs
s
Precharge BIOS internal to the
to PCI by providing a convenient off-the-
PCI 9030
shelf solution that can enable you to
s
Early power support internal to the
have your prototypes operational in as
PCI 9030
little as one week. At the same time, the
PCI 9030's built in SMARTarget perfor-
Figure 2 shows a typical Compact PCI
mance features guarantee you will meet
Hot Swap adapter card.
or beat your performance goals. In addi-
Small Form Factor PCI Designs
tion, SMARTarget flexibility features such
In the real estate conscious world of
as 3.3V and 5V tolerant I/O buffers and
PMC, PC-MIP, and PCMCIA PC-Cards,
local bus operation up to 60MHz, enable
the PCI 9030's attractive packaging
you to connect a wide variety of memory
options are the perfect solution.
and I/O devices. With SMARTarget in
SMARTarget Flexibility features such as
action, PCI Target Adapter designs have
never been simpler. Figure 1 shows a
typical PCI Target adapter card.
32-bit, 33MHz PCI Bus
Power Management supports both
D0, D3hot and D3cold power states.
GPIO's and Programmable Chip selects
save additional valuable board space. The
PCI 9030 enables a whole new generation
of mini form factor PCI cards. This is
shown in figure 3 and 4:
Additional Features
s
5V
Tolerant Operation- The PCI 9030
requires 3.3 Vcc. It provides 3.3V signal-
ing with 5V I/O tolerance on the PCI
and Local Buses.
EEPROM Interface-Contains an
interface for an optional serial EEPROM
that can be used to load configuration
information.
Local Bus runs from a local
bus clock and asserts the necessary
internal clocks. This clock runs asynchro-
nously to the PCI clock. The PCI 9030
provides a PCI Buffered clock which can
be used as a local bus clock if desired.
s
Serial
s
Clocks-The
I/O
32-bit 60MHz
PCI 9030
Local Bus
SMARTarget
™
Device
( BGA)
Memory
Figure 4.
PCMCIA PC-CARD
PLX [ PLX TECHNOLOGY ]
