Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
TC5 TCXO Series
Surface Mount Temperature Compensated Xtal Oscillator with or without Trimmer
Clipped Sine Wave Compatible
Standard Specifications
Operating Temperature Range
vs. Temp
Overall Frequency
vs. Vcc
Stability
Aging
Frequency Adj by Trimmer
Supply Voltage (Vcc)
Output Voltage Levels
Supply Current (Icc)
Output Load (see Test Circuit 1)
0 to +50°C to - 40 to +85°C available
± 1.5 to ± 10 PPM over Operating Temperature Range available
± 0.5 PPM maximum over Vcc ± 5%
± 3 PPM first year, ± 1 PPM per year thereafter at 25°C ± 5%
± 3 PPM minimum
5.0 volts and 3.3 volts available
1 volt p-p minimum
2 to 5 mA max
10 K / 10 pF
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
3TC5 1 C 100 A - 10.0M - XXX
(Internal Code or blank)
10.00 MHz
–
60.00 MHz
Model / Supply Voltage
TC5= 5.0 volts ±5%
3TC5= 3.3 volts ±5%
TCXO Package
1=11.4x9.6x2.0mm, w/o trimmer
8=11.4x9.6x2.0mm, with trimmer
Logic
C: Clipped Sine Wave
Frequency in MHz
Operating Temperature Range {Tightest FS available}
A: 0 to +50
°
C {±1.5 PPM }
D: -20 to +75
°
C {± 2.0 PPM }
B: 0 to +70
°
C {±1.5 PPM }
E: -30 to +75
°
C {± 2.5 PPM }
C: -10 to +70
°
C {± 2.0 PPM } F: -40 to +85
°
C {± 5.0 PPM }
Frequency Stability (FS)
015: ± 1.5 PPM 030: ± 3.0 PPM
020: ± 2.0 PPM 050: ± 5.0 PPM
025: ± 2.5 PPM 100: ± 10.0 PPM
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
not to scale
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Package 1 & 8
.449 (11.4)
.378 (9.6 ±.2)
Trimmer on Package 8 only, location may vary
Packaging
Bulk or
24mm tape
12mm pitch
Solder Pads
.079 (2.0 ±.2)
.260 (6.6)
Vcc
4
3
OUT
.270 (6.86)
1
N.C.
2
GND
4
3
1
2
.06 (1.5)
.300 (7.62)
.04 (1.0)
Jan 2004
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
27