Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
TC4 TCXO Series
Surface Mount or Full Size Metal Thru-Hole Temperature Compensated Xtal Oscillator
HCMOS, Clipped Sine Wave or Sine Wave Compatible
Standard Specifications
Operating Temperature Range
vs. Temp
Overall Frequency
vs. Vcc / Load
Stability
Aging
Frequency Adj by Trimmer
Supply Voltage (Vcc)
Output Logic
Output Voltage Levels
Supply Current (Icc)
Output Load (see Test Circuit 1)
0 to +50°C to -40 to +85°C available
± 1.0 to ± 10 PPM over Operating Temperature Range available
± 0.5 PPM maximum over Vcc ± 5% / ± 0.3 PPM maximum over Load ± 5%
± 3 PPM first year, ± 1 PPM per year thereafter at 25°C ± 5%
± 3 PPM minimum
5.0 volts and 3.3 volts available
HCMOS
Clipped Sine Wave
Sine Wave
Logic “1” 90% of Vcc min
1 volt p-p minimum
Logic “0” 10% of Vcc max
Consult Factory
20 to 40 mA max
2 to 5 mA max
10 TTL Loads or 15pF
10 K // 10 pF
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
3TC4 6 H 100 A - 10.0M - XXX
(Internal Code or blank)
Packaging
Tube or
on Pads,
SMD: bulk
10.00 MHz
–
60.00 MHz
On Test Circuit for Clipped Sine Wave only: Add a 20 K resistor from output to ground
Model / Supply Voltage
TC4= 5.0 volts ±5%
3TC4= 3.3 volts ±5%
TCXO Package, Max Height
6=Thru-Hole, 5.0mm
7=Surface Mount, 5.5mm
8=Surface Mount, 4.0mm
9=Thru-Hole, 8.5mm
Logic
C: Clipped Sine Wave
H: HCMOS
S: Sine Wave
Frequency in MHz
Operating Temperature Range {Tightest FS available}
A: 0 to +50
°
C {±1.0 PPM }
D: -20 to +75
°
C {± 2.0 PPM }
B: 0 to +70
°
C {±1.5 PPM }
E: -30 to +75
°
C {± 2.5 PPM }
C: -10 to +70
°
C {± 2.0 PPM } F: -40 to +85
°
C {± 5.0 PPM }
Frequency Stability (FS)
010: ± 1.0 PPM 030: ± 3.0 PPM
015: ± 1.5 PPM 050: ± 5.0 PPM
020: ± 2.0 PPM 100: ± 10.0 PPM
025: ± 2.5 PPM
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
not to scale
Package 6
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Package 7
.197 (5.0)
MAX
.193 (4.9)
MIN
.300 (7.62)
.217 (5.5)
MAX
.461 (11.7) MAX
.600 (15.24)
1
N.C.
Vcc
14
7
GND
OUT
8
Package 8
.157 (4.0)
MAX
.457 (11.6)
.386 (9.8)
Vcc
N.C.
GND
OUT
GND
.457 (11.6)
Package 9
.335 (8.5)
MAX
.157 (4.0)
MIN
Tab
.04 x .10
(1.0 x 2.5)
.748 (19.0) MAX
.492 (12.5) MAX
7
GND
Vcc
14
OUT
8
.300 (7.62)
.740 (18.8) MAX
.858 (21.8) MAX
.17
(4.3)
.12 (3.0)
.66 (16.76)
.100
(2.54)
TYP
.055
(1.4)
.04 x .20
(1.0 x 5.08)
.360 (9.14)
.300 (7.62)
GND
4
GND
3
.600 (15.24)
.600 (15.24)
.799 (20.3)
.110 (2.8)
Timmer hole locations may vary
Jan 2003
.799 (20.3)
1
Vcc
2
OUT
.600 (15.24)
GND
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
26
PLETRONICS [ PLETRONICS, INC. ]
