欢迎访问ic37.com |
会员登录 免费注册
发布采购

PMW3389DM 参数 Datasheet PDF下载

PMW3389DM图片预览
型号: PMW3389DM
PDF下载: 下载PDF文件 查看货源
内容描述: [Optical Gaming Navigation Chip]
分类和应用:
文件页数/大小: 20 页 / 1263 K
品牌: PIXART [ PIXART IMAGING INC. ]
 浏览型号PMW3389DM的Datasheet PDF文件第12页浏览型号PMW3389DM的Datasheet PDF文件第13页浏览型号PMW3389DM的Datasheet PDF文件第14页浏览型号PMW3389DM的Datasheet PDF文件第15页浏览型号PMW3389DM的Datasheet PDF文件第17页浏览型号PMW3389DM的Datasheet PDF文件第18页浏览型号PMW3389DM的Datasheet PDF文件第19页浏览型号PMW3389DM的Datasheet PDF文件第20页  
PMW3389DM Product Datasheet  
PixArt Imaging Inc.  
Optical Gaming Navigation Chip  
4.4 AC Electrical Specifications  
Table 5. AC Electrical Specifications  
Chip electrical characteristics over recommended operating conditions. Typical values at 25°C, VDD = 1.9V, VDDIO=1.9V  
Parameter  
Symbol  
Min  
Typical  
Max  
Units  
Notes  
Motion Delay After  
Reset  
tMOT-RST  
50  
ms  
From reset to valid motion, assuming  
motion is present  
Shutdown  
tSTDWN  
500  
From Shutdown mode active to low  
current  
s  
Wake From Shutdown  
tWAKEUP  
50  
ms  
From Shutdown mode inactive to  
valid motion. Notes: A RESET must  
be asserted after a shutdown. Refer  
to section “Notes on Shutdown”, also  
note tMOT-RST  
MISO Rise Time  
MISO Fall Time  
MISO Delay After SCLK tDLY-MISO  
tr-MISO  
tf-MISO  
50  
50  
ns  
ns  
ns  
CL = 100pF  
CL = 100pF  
From SCLK falling edge to MISO data  
valid, no load conditions  
90  
MISO Hold Time  
MOSI Hold Time  
thold-MISO  
thold-MOSI  
200  
200  
ns  
ns  
Data held until next falling SCLK edge  
Amount of time data is valid after  
SCLK rising edge  
MOSI Setup Time  
tsetup-  
MOSI  
120  
180  
ns  
From data valid to SCLK rising edge  
SPI Time Between  
Write Commands  
tSWW  
From rising SCLK for last bit of the  
first data byte, to rising SCLK for last  
bit of the second data byte.  
s  
SPI Time Between  
Write And Read  
Commands  
SPI Time Between  
Read And Subsequent  
Commands  
tSWR  
180  
20  
From rising SCLK for last bit of the  
first data byte, to rising SCLK for last  
bit of the second address byte.  
From rising SCLK for last bit of the  
first data byte, to falling SCLK for the  
first bit of the address byte of the  
next command.  
s  
s  
tSRW  
tSRR  
SPI Read Address-Data  
Delay  
tSRAD  
160  
35  
From rising SCLK for last bit of the  
address byte, to falling SCLK for first  
bit of data being read.  
From rising SCLK for last bit of the  
address byte, to falling SCLK for first  
bit of data being read. Applicable for  
Burst Mode Motion Read only.  
s  
s  
SPI Read Address-Data tSRAD_MO  
Delay for Burst Mode  
Motion Read  
TBR  
NCS Inactive After  
Motion Burst  
tBEXIT  
500  
ns  
Minimum NCS inactive time after  
motion burst before next SPI usage  
Version 1.01 | 03 Jan 2019 | 11020AENW  
PixArt Imaging Inc. http://www.pixart.com  
All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.  
16  
 复制成功!