欢迎访问ic37.com |
会员登录 免费注册
发布采购

PMW3330DM-T2QU 参数 Datasheet PDF下载

PMW3330DM-T2QU图片预览
型号: PMW3330DM-T2QU
PDF下载: 下载PDF文件 查看货源
内容描述: [Optical Gaming Navigation Sensor]
分类和应用:
文件页数/大小: 18 页 / 2375 K
品牌: PIXART [ PIXART IMAGING INC. ]
 浏览型号PMW3330DM-T2QU的Datasheet PDF文件第10页浏览型号PMW3330DM-T2QU的Datasheet PDF文件第11页浏览型号PMW3330DM-T2QU的Datasheet PDF文件第12页浏览型号PMW3330DM-T2QU的Datasheet PDF文件第13页浏览型号PMW3330DM-T2QU的Datasheet PDF文件第14页浏览型号PMW3330DM-T2QU的Datasheet PDF文件第16页浏览型号PMW3330DM-T2QU的Datasheet PDF文件第17页浏览型号PMW3330DM-T2QU的Datasheet PDF文件第18页  
PMW3360 Product Datasheet  
Optical Gaming Navigation Sensor  
PixArt Imaging Inc.  
2.3  
AC Electrical Specifications  
Table 4. AC Electrical Specifications  
Electrical characteristics over recommended operating conditions. Typical values at 25 °C, VDD = 1.9 V, VDDIO = 1.9V.  
Parameter  
Symbol  
Minimum Typical Maximum Units Notes  
Motion Delay After Reset tMOT-RST  
50  
ms  
From reset to valid motion, assuming motion  
is present  
Shutdown  
tSTDWN  
500  
From Shutdown mode active to low current  
s  
Wake From Shutdown  
tWAKEUP  
50  
ms  
From Shutdown mode inactive to valid  
motion. Notes: A RESET must be asserted  
after a shutdown. Refer to section “Notes on  
Shutdown”, also note tMOT-RST  
MISO Rise Time  
tr-MISO  
50  
50  
ns  
ns  
ns  
CL = 100pF  
CL = 100pF  
MISO Fall Time  
tf-MISO  
MISO Delay After SCLK  
tDLY-MISO  
90  
From SCLK falling edge to MISO data valid, no  
load conditions  
MISO Hold Time  
MOSI Hold Time  
thold-MISO  
thold-MOSI  
200  
200  
ns  
ns  
Data held until next falling SCLK edge  
Amount of time data is valid after SCLK rising  
edge  
MOSI Setup Time  
tsetup-MOSI  
tSWW  
120  
180  
ns  
From data valid to SCLK rising edge  
SPI Time Between Write  
Commands  
From rising SCLK for last bit of the first data  
byte, to rising SCLK for last bit of the second  
data byte.  
s  
SPI Time Between Write  
And Read Commands  
tSWR  
180  
20  
From rising SCLK for last bit of the first data  
byte, to rising SCLK for last bit of the second  
address byte.  
s  
s  
s  
s  
SPI Time Between Read  
And Subsequent  
Commands  
tSRW  
tSRR  
From rising SCLK for last bit of the first data  
byte, to falling SCLK for the first bit of the  
address byte of the next command.  
SPI Read Address-Data  
Delay  
tSRAD  
160  
From rising SCLK for last bit of the address  
byte, to falling SCLK for first bit of data being  
read.  
SPI Read Address-Data  
Delay for Burst Mode  
Motion Read  
tSRAD_MOTBR 35  
From rising SCLK for last bit of the address  
byte, to falling SCLK for first bit of data being  
read. Applicable for Burst Mode Motion Read  
only.  
NCS Inactive After  
Motion Burst  
tBEXIT  
500  
120  
ns  
ns  
Minimum NCS inactive time after motion  
burst before next SPI usage  
NCS To SCLK Active  
tNCS-SCLK  
From last NCS falling edge to first SCLK rising  
edge  
Version 1.30 | 6 April 2016  
PixArt Imaging Inc. http://www.pixart.com  
All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.  
15  
 复制成功!