PAW3203DI
PAW3203DI WIRELESS OPTICAL MOUSE SINGLE CHIP
General Description
The PAW3203DI optical mouse sensor is a CMOS wireless mouse single chip that serves as a non-mechanical
motion estimation engine for implementing a wireless mouse.
Features
Single power supply
27MHz FSK wireless protocol
No mechanical parts
Complete 2-D motion sensor
Precise optical motion estimation technology
Interface
27 MHz FSK wireless protocol
27 MHz
3000 frames/sec
28 inches/sec
TBD
400/600/800(default)/1000 CPI
5mA @Mouse moving (Normal)
800uA @Mouse not moving (Sleep1)
150uA @Mouse not moving (Sleep2)
Key Specification
Power Supply
Range
Optical Lens
1.73V ~ 1.87V (VDDD,VDDA, VDD)
2.5V ~ 2.9V (VDD)
1:1
Accurate motion estimation over a wide range System Clock
of surfaces
Frame Rate
High resolution up to 1000 CPI
High speed motion detection up to 28 inches/sec Speed
Supports five buttons (R, M, L, B4, B5) and
Acceleration
three axes (X, Y, Z) output
Mouse operation condition, RF protocol timing Resolution
and sensor chip turn function can be power-up
loaded from external EEPROM
Operating
Support
I
2
C
TM
EEPROM interface
Current
Battery low detection
Package
Shrunk DIP24
Ordering Information
Order Number
PAW3203DI
Resolution (CPI)
800
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
1
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw
V0.3 April. 2008