PixArt Imaging Inc.
ADNS-7550 Integrated Molded Lead-Frame DIP Sensor
Feature For
Illustration Only
9.10
0.358
4.10
0.161
Section A-A
Pin 1
10.90
(At shoulder)
0.429
16.20
0.638
9.10
0.358
0.50
0.020
2.41
0.095
3.96
0.156
0.36
0.014
1.69
0.067
2.83
0.111
4.05
0.159
16X 0.50
0.020
3.18
0.125
Protective
kapton tape
0.20
0.008
10.90
±
0.40 (At lead tip)
0.429
±
0.016
1.52
0.060
0.78
0.031
A
10.10
0.398
A
2X 0.50
0.020
0.89
0.035
1.78
0.070
Optical center
Sensor hole
5.05
0.199
2X 0.50
0.020
VCSEL hole
Notes:
1. Dimensions in milimeter / inches.
2. Dimensional tolerance:
±0.1mm.
3. Coplanarity of lead: 0.1mm
4. Lead pitch tolerance:
±0.15mm.
5. Non-cumulative pitch tolerance:
±0.15mm.
6. Maximum flash:
±0.2mm.
7. Angular tolerance: 3
8. Chamfer (25 x2) on the taper side of the lead.
9. Brackets () indicate reference dimension.
10. Document Number: LSR_INT_16A_Pkg_001
Figure 2. Package outline drawing
CAUTION:
It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw
3