PixArt Imaging Inc.
ADBS-A350 Optical Finger Navigation
Image Dump
Address: 0x28
Access: Read/Write
Reset Value: 0x00
7
6
5
4
3
2
1
0
Bit
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
FVD
Field
Data Type: Bit field
USAGE: This register is used to enable and initiating Image Dump. See note on Image Dump for more information.
Field Name
Description
FVD
0: Disable FVD
1: Enable FVD
Observation
Access: Read/Write
Address: 0x2e
Reset Value: Any
7
6
5
4
3
2
1
0
Bit
MODE1
MODE0
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Field
Data Type: Bit field
USAGE: Register 0x2e provides bits that are set every frame. It can be used during ESD testing to check that the chip is
running correctly. Writing anything to this register will clear the bits.
Field Name
Description
MODE1-0
Mode Status: Reports which mode the sensor is in.
00 = Run
01 = Rest1
10 = Rest2
11 = Rest3
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail: fae_service@pixart.com.tw
40