欢迎访问ic37.com |
会员登录 免费注册
发布采购

0800394 参数 Datasheet PDF下载

0800394图片预览
型号: 0800394
PDF下载: 下载PDF文件 查看货源
内容描述: THERMOMARK线 [THERMOMARK LINE]
分类和应用:
文件页数/大小: 76 页 / 6550 K
品牌: PHOENIX [ PHOENIX CONTACT ]
 浏览型号0800394的Datasheet PDF文件第12页浏览型号0800394的Datasheet PDF文件第13页浏览型号0800394的Datasheet PDF文件第14页浏览型号0800394的Datasheet PDF文件第15页浏览型号0800394的Datasheet PDF文件第17页浏览型号0800394的Datasheet PDF文件第18页浏览型号0800394的Datasheet PDF文件第19页浏览型号0800394的Datasheet PDF文件第20页  
Scratch resistance  
DIN EN ISO 1518  
Labelings and printings must also be  
resistant to external, point and/or linear  
mechanical loads. For this reason, Phoenix  
Contact tests all labelings and printings for  
scratch resistance in accordance with the  
aforementioned standard. Here a  
scratching tool with a hemispherical tip  
(ø 1 mm) is applied to the test object with  
2 - 6 N, depending on the printing  
procedure. A visual and microscopic  
inspection of the test objects is then  
performed.  
Phoenix Contact marking  
materials fulfill these demanding  
mechanical requirements.  
Grid test  
DIN EN ISO 2409  
Pull-out direction  
A "Sellotape test" is conducted in  
accordance with this standard. A  
Printing  
transparent self-adhesive tape (e.g.  
Sellotape) with an adhesive force of 10 1 N  
is applied to the labeling or printing to be  
tested and is then removed from the  
surface with an angle of 60° to the pull-out  
direction with a speed of approx. 1 cm/s.  
≈ 60°  
Adhesive tape  
There should be no marks from the  
printing on the adhesive tape after the test.  
Phoenix Contact marking materials are  
tough and resistant to peeling.  
Synthetic material  
Adhesive strength test  
based on FINAT test method No. 2  
The purpose of this test is to compare the  
adhesive strength of labels on various basic  
materials. To this end, a strip of labels  
(25 mm x 175 mm) is applied to the  
respective basic material with a specified  
force. After a defined storage period, the  
strip is removed from the basic material at  
an angle of 90° and with a speed of  
300 mm/min. The adhesive strength is  
specified in N/25 mm. The test thus enables  
the selection of the most suitable label for  
the application.  
 复制成功!