Philips Semiconductors
Product specification
Multistandard vision and sound-IF PLL with
DVB-IF processing
TDA9819
The DVB output signal VO DVB can be adjusted in a range
of ±3 dB by a control voltage ∆Vadj at pin 15. The internal
AGC can be switched off (see Table 2) and the IF gain can
be controlled by an external voltage at pin 13. The tuner
AGC is active in both instances.
DVB mixer
The VCO can be controlled by an external DC signal to
provide a carrier for the down-conversion of the DVB-IF
signal. The VCO frequency as a function of the voltage at
pin 16 is given in Figs 10 and 11.
DVB output buffer
DVB AGC
The output buffer for the DVB signal has a high bandwidth
and 0 dB gain. An inverting configuration was chosen to
obtain minimum distortion. For non-DVB standards the
buffer is switched to a mute to reduce the output signal
level.
For the DVB operation a peak AGC detector is activated.
The peak value of (digital) QAM signal is detected and
controlled to a constant value by the variable VIF amplifier.
The detector bandwidth is adapted to the signal frequency
(3 to 11 MHz). The external AGC time constant is given by
the VIF AGC capacitor at pin 28.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
VP
PARAMETER
CONDITIONS
MIN.
MAX.
7.0
UNIT
supply voltage (pin 29)
maximum chip temperature of 125 °C;
0
0
V
note 1
Vn
voltage at pins 1 to 9, 11 to 13,
15, 16, 19, 22, 23 and 28 to 32
VP
V
tsc(max)
V19
maximum short-circuit time
tuner AGC output voltage
storage temperature
−
10
s
0
13.2
+150
+70
+300
V
Tstg
−25
°C
°C
V
Tamb
Ves
operating ambient temperature
electrostatic handling voltage
−20
note 2
−300
Notes
1. IP = 125 mA; Tamb = 70 °C; Rth(j-a) = 60 K/W.
2. Machine model class B.
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
thermal resistance from junction to ambient
CONDITIONS
VALUE
60
UNIT
Rth(j-a)
in free air
K/W
1998 Jul 14
8
NXP [ NXP ]
