Philips Semiconductors
Product specification
3 W mono BTL audio amplifier with DC
volume control
TDA7056AT
V
P
handbook, full pagewidth
(1)
100 nF
220 µF
n.c.
1 to 3, 8 to 13,
16, 18 to 20
4
+
−
I + i
TDA7056AT
14
17
0.47 µF
5
positive input
+
7
R
= 16 Ω
L
−
I − i
+
STABILIZER
TEMPERATURE
PROTECTION
5
kΩ
R
s
V
ref
DC
volume
control
6
15
MGM588
ground
To avoid instabilities and too high distortion, the input- and power ground must be separated as long as possible and connected together as close as
possible to the IC.
(1) This capacitor can be omitted if the 220 µF electrolytic capacitor is connected close to pin 2.
Fig.14 Test and application diagram.
For single-end application the output peak current may not exceed 100 mA; at higher output currents the short circuit
protection (MLC) will be activated.
1998 Feb 23
12