Philips Semiconductors
Product data
Single-chip 8-bit microcontroller with 10-bit A/D,
capture/compare timer, high-speed outputs, PWM
80C552/83C552
FEATURES
•
80C51 central processing unit
•
8k
×
8 ROM expandable externally to 64 kbytes
•
ROM code protection
•
An additional 16-bit timer/counter coupled to four capture registers
and three compare registers
DESCRIPTION
The 80C552/83C552 (hereafter generically referred to as 8XC552)
Single-Chip 8-Bit Microcontroller is manufactured in an advanced
CMOS process and is a derivative of the 80C51 microcontroller
family. The 8XC552 has the same instruction set as the 80C51.
Three versions of the derivative exist:
•
83C552—8 kbytes mask programmable ROM
•
•
•
•
•
•
•
•
•
•
•
Two standard 16-bit timer/counters
256
×
8 RAM, expandable externally to 64 kbytes
Capable of producing eight synchronized, timed outputs
A 10-bit ADC with eight multiplexed analog inputs
Two 8-bit resolution, pulse width modulation outputs
Five 8-bit I/O ports plus one 8-bit input port shared with analog
inputs
I
2
C-bus serial I/O port with byte oriented master and slave
functions
Full-duplex UART compatible with the standard 80C51
On-chip watchdog timer
Three speed ranges:
–
3.5 to 16 MHz
–
3.5 to 24 MHz (ROM, ROMless only)
Three operating ambient temperature ranges:
–
P83C552xBx: 0
°C
to +70
°C
–
P83C552xFx: –40
°C
to +85
°C
(XTAL frequency max. 24 MHz)
–
P83C552xHx: –40
°C
to +125
°C
(XTAL frequency max. 16 MHz)
•
•
80C552—ROMless version of the 83C552
87C552—8 kbytes EPROM (described in a separate chapter)
The 8XC552 contains a non-volatile 8k
×
8 read-only program
memory (83C552), a volatile 256
×
8 read/write data memory, five
8-bit I/O ports, one 8-bit input port, two 16-bit timer/event counters
(identical to the timers of the 80C51), an additional 16-bit timer
coupled to capture and compare latches, a 15-source,
two-priority-level, nested interrupt structure, an 8-input ADC, a dual
DAC pulse width modulated interface, two serial interfaces (UART
and I
2
C-bus), a “watchdog” timer and on-chip oscillator and timing
circuits. For systems that require extra capability, the 8XC552 can
be expanded using standard TTL compatible memories and logic.
In addition, the 8XC552 has two software selectable modes of
power reduction—idle mode and power-down mode. The idle mode
freezes the CPU while allowing the RAM, timers, serial ports, and
interrupt system to continue functioning. The power-down mode
saves the RAM contents but freezes the oscillator, causing all other
chip functions to be inoperative.
The device also functions as an arithmetic processor having
facilities for both binary and BCD arithmetic plus bit-handling
capabilities. The instruction set consists of over 100 instructions: 49
one-byte, 45 two-byte, and 17 three-byte. With a 16 MHz (24 MHz)
crystal, 58% of the instructions are executed in 0.75
µs
(0.5
µs)
and
40% in 1.5
µs
(1
µs).
Multiply and divide instructions require 3
µs
(2
µs).
LOGIC SYMBOL
V
SS
V
DD
XTAL1
XTAL2
EA
ALE
PSEN
AV
SS
AV
DD
AVref+
AVref–
STADC
PWM0
PWM1
PORT 0
LOW ORDER
ADDRESS AND
DATA BUS
ADC0-7
PORT 5
CT0I
CT1I
CT2I
CT3I
T2
RT2
SCL
SDA
PORT 2
PORT 1
HIGH ORDER
ADDRESS AND
DATA BUS
CMSR0-5
PORT 4
RxD/DATA
TxD/CLOCK
INT0
INT1
T0
T1
WR
RD
CMT0
CMT1
RST
EW
PORT 3
SU01691
2002 Sep 03
2
853-1467 28849
PHILIPS [ NXP SEMICONDUCTORS ]
