Philips Semiconductors
Product data
LM124/224/324/324A/
SA534/LM2902
Low power quad op amps
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
32 or ±16
32
UNIT
V
CC
V
IN
V
IN
P
D
Supply voltage
V
DC
V
DC
V
DC
Differential input voltage
Input voltage
–0.3 to +32
1
Maximum power dissipation, T
= 25 °C (still-air)
amb
N package
D package
DH package
1420
1040
762
mW
mW
mW
2
Output short-circuit to GND one amplifier
Continuous
50
V
< 15 V and T = 25 °C
amb
CC
DC
3
I
IN
Input current (V < –0.3 V)
mA
IN
Operating ambient temperature range
T
amb
LM324/324A
LM224
SA534
LM2902
LM124
0 to +70
–25 to +85
–40 to +85
–40 to +125
–55 to +125
°C
°C
°C
°C
°C
T
Storage temperature range
–65 to +150
230
°C
°C
stg
T
sld
Lead soldering temperature (10 sec max)
NOTES:
1. Derate above 25 °C at the following rates:
N package at 11.4 mW/°C
D package at 8.3 mW/°C
DH package at 6.1mW/°C
2. Short-circuits from the output to V + can cause excessive heating and eventual destruction. The maximum output current is approximately
CC
40 mA, independent of the magnitude of V . At values of supply voltage in excess of +15 V continuous short-circuits can exceed the
CC
DC
power dissipation ratings and cause eventual destruction.
3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the
input PNP transistors becoming forward biased and thereby acting as input bias clamps. In addition, there is also lateral NPN parasitic
transistor action on the IC chip. This action can cause the output voltages of the op amps to go to the V+ rail (or to ground for a large
overdrive) during the time that the input is driven negative.
3
2003 Sep 19
PHILIPS [ PHILIPS SEMICONDUCTORS ]
