HEF4053B-Q100
Triple single-pole double-throw analog switch
Rev. 1 — 22 February 2013
Product data sheet
1. General description
The HEF4053B-Q100 is a triple single-pole double-throw (SPDT) analog switch, suitable
for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select
input (Sn), two independent inputs/outputs (nY0 and nY1) and a common input/output
(nZ). All three switches share an enable input (E). A HIGH on E causes all switches into
the high-impedance OFF-state, independent of Sn.
V
DD
and V
SS
are the supply voltage connections for the digital control inputs (Sn and E).
The V
DD
to V
SS
range is 3 V to 15 V. The analog inputs/outputs (nY0, nY1 and nZ) can
swing between V
DD
as a positive limit and V
EE
as a negative limit. V
DD
V
EE
may not
exceed 15 V. Unused inputs must be connected to V
DD
, V
SS
, or another input. For
operation as a digital multiplexer/demultiplexer, V
EE
is connected to V
SS
(typically
ground). V
EE
and V
SS
are the supply voltage connections for the switches.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from
40 C
to +85
C
and from
40 C
to +125
C
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0
)
Complies with JEDEC standard JESD 13-B
3. Applications
Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating
PHILIPS [ NXP SEMICONDUCTORS ]
