HEF4051B-Q100
8-channel analog multiplexer/demultiplexer
Rev. 1 — 12 July 2012
Product data sheet
1. General description
The
HEF4051B-Q100
is an 8-channel analog multiplexer/demultiplexer with three address
inputs (S1 to S3), an active LOW enable input (E), eight independent inputs/outputs
(Y0 to Y7) and a common input/output (Z). The device contains eight bidirectional analog
switches, each with one side connected to an independent input/output (Y0 to Y7) and the
other side connected to a common input/output (Z). With E LOW, one of the eight
switches is selected (low-impedance ON-state) by S1 to S3. With E HIGH, all switches
are in the high-impedance OFF-state, independent of S1 to S3. If break before make is
needed, then it is necessary to use the enable input.
V
DD
and V
SS
are the supply voltage connections for the digital control inputs (S1 to S3,
and E). The V
DD
to V
SS
range is 3 V to 15 V. The analog inputs/outputs (Y0 to Y7, and Z)
can swing between V
DD
as a positive limit and V
EE
as a negative limit. V
DD
V
EE
may not
exceed 15 V. Unused inputs must be connected to V
DD
, V
SS
, or another input. For
operation as a digital multiplexer/demultiplexer, V
EE
is connected to V
SS
(typically
ground). V
EE
and V
SS
are the supply voltage connections for the switches.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from
40 C
to +85
C
and from
40 C
to +125
C
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
ESD protection:
MIL-STD-833, method 3015 exceeds 2000V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0
)
Complies with JEDEC standard JESD 13-B
3. Applications
Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating
PHILIPS [ NXP SEMICONDUCTORS ]
