74HC4051; 74HCT4051
NXP Semiconductors
8-channel analog multiplexer/demultiplexer
7. Functional description
7.1 Function table
Table 3.
Function table[1]
Input
Channel ON
E
L
L
L
L
L
L
L
L
H
S2
L
S1
L
S0
L
Y0 to Z
Y1 to Z
Y2 to Z
Y3 to Z
Y4 to Z
Y5 to Z
Y6 to Z
Y7 to Z
switches off
L
L
H
L
L
H
H
L
L
H
L
H
H
H
H
X
L
H
L
H
H
X
H
X
[1] H = HIGH voltage level;
L = LOW voltage level;
X = don’t care.
8. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).
Symbol
VCC
IIK
Parameter
Conditions
Min
Max
+11.0
20
20
25
20
50
Unit
V
[1]
supply voltage
0.5
input clamping current
VI < 0.5 V or VI > VCC + 0.5 V
-
mA
mA
mA
mA
mA
mA
C
ISK
switch clamping current VSW < 0.5 V or VSW > VCC + 0.5 V
-
ISW
switch current
0.5 V < VSW < VCC + 0.5 V
-
IEE
supply current
-
ICC
supply current
-
IGND
Tstg
Ptot
ground current
-
50
+150
750
500
storage temperature
total power dissipation
65
[2]
[3]
DIP16 package
-
-
mW
mW
SO16, (T)SSOP16, and
DHVQFN16 package
P
power dissipation
per switch
-
100
mW
[1] To avoid drawing VCC current out of terminal Z, when switch current flows into terminals Yn, the voltage drop across the bidirectional
switch must not exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out of terminals Yn, and in this case
there is no limit for the voltage drop across the switch, but the voltages at Yn and Z may not exceed VCC or VEE
.
[2] For DIP16 packages: above 70 C the value of Ptot derates linearly with 12 mW/K.
[3] For SO16 packages: above 70 C the value of Ptot derates linearly with 8 mW/K.
For SSOP16 and TSSOP16 packages: above 60 C the value of Ptot derates linearly with 5.5 mW/K.
For DHVQFN16 packages: above 60 C the value of Ptot derates linearly with 4.5 mW/K.
74HC_HCT4051
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
Product data sheet
Rev. 7 — 19 July 2012
5 of 31