Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit
www.phihong.com
for the most up-to-date specifications.
PSA25L Characteristics
INPUT:
AC Input Voltage Rating
100 to 240VAC
WWW.PHIHONG.COM
ENVIRONMENTAL:
Temperature
Operation
Non-operation
0 to +40°C
-25 to +75°C
AC Input Voltage Range
90 to 264VAC
AC Input Frequency
47 to 63Hz
Humidity
Operation
Non-operation
0 to 85% Non-Condensing
0 to 90% Non-Condensing
Input Current
0.8-1A (rms) maximum @ 120VAC
0.4-0.5A (rms) maximum @ 240VAC
Emissions
Conducted:
FCC Class B
EN55022 Class B
Radiated:
FCC Class A
EN55022 Class A
Leakage Current
<0.25mA 254VAC, 60Hz
Inrush Current
30A for 120VAC at maximum load
60A for 240VAC at maximum load
(Cold start @ ambient 25°C)
Dielectric Withstand (Hi-pot) Test
Input to output: 3000VAC for 1minute 10mA
OUTPUT:
Efficiency
70% minimum
Insulation Resistance
Input to output: >10M OHM, 500VDC
Hold-up Time
16mS minimum @ maximum load, and 120VAC 60Hz
Input Connector
Molex 09-50-3031 or equivalent
Over-Voltage Protection
By Zener Diode Clamping
Output Connector
Single and Dual output:
Molex 09-50-3051 or equivalent
Single: Pin 1: NC; Pin 2, 3: COM; Pin 4, 5: V1
Dual: Pin 1: V2; Pin 2, 3: COM; Pin 4, 5: V1
Triple output:
Molex 09-50-3061or equivalent
Pin 1: V2; Pin 2, 3: V1; Pin 4, 5: COM; Pin 6: V3
Short Circuit Protection
Output equipped with short circuit protection – auto restart
Output can be shorted permanently without damage
PHIHONG [ PHIHONG USA INC. ]
