PSA120U Series Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage Rating
100 to 240VAC
ENVIRONMENTAL:
Temperature
Operation
Storage
0 to +40°C
-20 to +70°C
AC Input Voltage Range
90 to 264VAC
Relative Humidity (Non-condensing)
Operation
Storage
20 to 80%
10 to 90%
AC Input Frequency
47 to 63Hz
Emissions
Input Current
FCC Class B
2.5A (rms) Max. @ 115VAC
1.5A (rms) Max. @ 230VAC
EN55022 Class B
Harmonics and Flicker
IEC61000-3-2 Class D
IEC61000-3-3
Leakage Current
3.5mA Max. @ 254VAC 50Hz.
Inrush Current (cold start @25°C Ambient)
Less than 65A at 120VAC
Less than 130A at 240VAC
Power Factor Correction
≥ 0.95 at 100VAC full load
≥ 0.90 at 240VAC full load
No Load Power Saving
< 0.50W for 115VAC
< 0.75W for 230VAC
Immunity
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
OUTPUT:
Efficiency
85% minimum average efficiency
Hold-up Time
10mS min. at 120VAC and max. load
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000VAC for 1 minute,
10mA
Over-Voltage Protection
The output is protected from over voltage fault at
all conditions including open-loop
DC Output Connector
PSA120U-120-R: Molex PN: 39-01-3065
Over-Power Protection
PSA120U-240-R & PSA120U-480-R:
Auto restart
2.5mm x 5.5mm Center Positive barrel connector
Short Circuit Protection
The output will withstand a short circuit across the
outputs with auto-restart function. Output can be
shorted without damage.
PHIHONG [ PHIHONG USA INC. ]
