POE61X Characteristics
INPUT:
AC Input Voltage Range
90 to 264VAC
WWW.PHIHONG.COM
EMC
FCC Part 15 Class A
EN55022 Class A
AC Input Voltage Rating
100 to 240VAC, 47-63Hz
Isolation Test
Primary to Secondary: 4242VDC for 1 minute, 10mA
Primary to F.G.: 2121VDC for 1 minute, 10mA
Secondary to F.G.: 2121VDC for 1 minute, 10mA
AC Input Current
2.0A (RMS) maximum for 90VAC
1.2A (RMS) maximum for 240VAC
Immunity
ESD:
RS:
EFT:
Surge:
CS:
Voltage Dips
Harmonic:
EN61000-4-2. Level 3
EN61000-4-3. Level 2
EN61000-4-4. Level 2
EN61000-4-5. Level 3
EN61000-4-6. Level 2
EN61000-4-11
EN61000-3-2 Class A
Leakage Current
0.25mA maximum for 264VAC, 50Hz (U Models)
0.25mA maximum fro 264VAC, 50Hz (W models)
AC Inrush Current
30A maximum for 115VAC
60A maximum for 230VAC
(at cold start, 25°C)
Insulation Resistance
Primary to Secondary: >10M OHM 500VDC
Primary to Field Ground: >10M OHM 500VDC
OUTPUT:
Total Output Power
60W
Output Ripple
250mVp-p
FEATURE:
Over Voltage/Current, Short Circuit
Protection
Outputs equipped with short circuit protection and
overload protection.
The output can be shorted permanently without damage
DC Offset
No data degradation with DC imbalance 18mA
Efficiency
Meets Level V Requirements; 87% minimum
Input Connector
IEC320 C14 for U Models
IEC320 C8 for W Models
Output Connection
4-pair powering for Gigabit models
Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-)
2-pair powering for non-gigabit models
Pins 4,5(+) Pins 7,8 (-)
Warranty
1 Year
Hold-up Time
10mS min. 120VAC and maximum load
ENVIRONMENTAL:
Temperature
Operation
0 to +40°C
Non-operation
Humidity
Operation
-20 to +65°C
5 to 90%
PHIHONG [ PHIHONG USA INC. ]
