Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the factory and
visit www.phihong.com for the most up-to-date specifications.
POE36U Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage Range
90 to 264VAC
AC Input Voltage Rating
100 to 240VAC,47-63Hz
AC Input Current
1.0A(RMS) max. for 90VAC
0.55A(RMS) max. for 240VAC
EMC
FCC Part 15 Class B
EN55022 Class B
Leakage Current
3.5mA max. @ 254VAC 60Hz
Isolation Test
Primary to Secondary: 3000VAC for 1 minute 10mA
Primary to F.G.: 1500VAC for 1 minute
Output to F.G.: 1500VAC
AC Inrush Current
30A(RMS) max. for 115VAC
40A(RMS) max. for 230VAC
Immunity
OUTPUT:
Total Output Power
33.6W
ESD:
EN61000-4-2. Level 3
EN61000-4-3. Level 2
EN61000-4-4. Level 2
EN61000-4-5. Level 3
EN61000-4-6. Level 2
EN61000-4-11
RS:
EFT:
Surge:
CS:
Voltage Dips
Harmonic:
DC Offset
No Data degradatio with DC imbalance 18mA
EN61000-3-2
Efficiency
Insulation Resistance
Primary to secondary: >10M OHM 500VDC
Primary to FC: >10M OHM 500VDC
78% (typical) at Max. load, and 120VAC 60Hz
Hold-up Time
16mS min. 120VAC and max. load
FEATURE:
Over Voltage/Current, Short Circuit Protection
Outputs equipped with short circuit protection and overload
protection as per 802.3at specification
Transient O/P Voltage Protection
60V max.
The output can be shorted permanently without damage
ENVIRONMENTAL:
Temperature
Indicators
Operation
-20 to +50°C
-25 to +65°C
Led #1 indicator for input power “on” GREEN
Led #2 Indicator for Class 4 PD connected GREEN
Led #3 Indicator that Detected and Connected to valid
IEEE802.3af load-GREEN
Non-operation
Humidity
Operation
5 to 90%
Input Connector
IEC320 inlet 3 pin
Dimension Diagram Unit: mm (inch)
Output Connection
+pins 3,6
- pins 1,2
PHIHONG [ PHIHONG USA INC. ]
