POE31X-1AT Characteristics
INPUT:
WWW.PHIHONG.COM
EMC
AC Input Voltage Rating
100 to 240VAC
ESD: IEC61000-4-2
RS: IEC61000-4-3
Level 3
Level 3
EFT/Burst:
IEC61000-4-4 Level 2
AC Input Voltage Range
90 to 264VAC
Surge: IEC61000-4-5
CS: IEC61000-4-6
Level 3
Level 3
Voltage Dips: IEC61000-4-11
AC Input Current
Harmonic:
IEC61000-3-2 Class A
0.8A (RMS) maximum at 120VAC
0.55A (RMS) maximum at 240VAC
Isolation (HI-POT)
Primary to secondary: 1500VAC for 1
minute, 10mA
AC Input Frequency
47 to 63Hz
Insulation Resistance
Leakage Current
Primary to secondary: 10M Ohm 500VDC
350uA maximum for U models
250uA maximum for W models
FEATURES:
Over Voltage/Current, Short Circuit
Protection
Max In-rush Current
60A maximum at 240VAC and maximum
load (Cold Start at ambient 25°C)
The output is equipped with short-circuit
protection and overload protection as per the
IEEE 802.3at specification and conforms to
UL60950-2. The output can be shorted
permanently without damage.
OUTPUT:
Output Power
30W
Indicator
Hold up Time
10mSec min at max load at 120VAC, 60Hz
Solid Green: Valid IEEE802.3at load
detected and connected “ON”
Blinking Green: Power “ON” ready for
connection
Blinking Red/Green: Invalid load connected
Blinking Red: fault
Transient O/P Voltage Protection
60V max at switch on/off at any AC line
phase
Efficiency
AC Input Connector
80% Typical at max load at 120VAC, 60Hz
IEC320 C14 - U Models – three wire
IEC320 C8 – W Models – two wire
Environment
Operating Temperature
0 to +40°C
Output Connection
Non-operating Temperature -20 to +65°C
+pins 3,6 / -pins 1,2
Relative Humidity
5 to 90%
Data IN/POE OUT Connector
EMI
RJ45
EN55022 Class B
FCC part 15 Class B
Warranty
1 year
PHIHONG [ PHIHONG USA INC. ]
