POE30S-1ATG Characteristics
WWW.PHIHONG.COM
INPUT:
Input Source
Receives power from Ultra PoE Midspan
Immunity
ESD EN61000-4-2 Level 3
RS EN61000-4-3 Level 3
Surge EN61000-4-5 Level 2
Input Detection
12.5K Detection
Isolation (HI-POT)
2121VDC for 1 min, 10mA
DC Input Voltage Range
50VDC to 57VDC
Insulation Resistance
Input to Ground: >10M OHM 500VDC
Output to Ground: >10M OHM 500VDC
DC Input Current
1.6A at 57VDC and maximum load
FEATURES
OUTPUT:
Total Output Power
30W with Ultra PoE Input
Over Current Protection
For PoE Class 0-3 Detection on Output: 450mA
maximum
For PoE Class 4 Detection on Output:650mA
maximum
Ripple and Noise (Vp-p)
250mV maximum
Short Circuit Protection
Output Detection
25K Detection IEEE802.3at compliance
Outputs equipped with short circuit protection
The output can be shorted permanently without
damage
Efficiency
75% minimum at maximum load
Indicators
Ethernet –
IN/OUT
Green LED1 and LED2 -
10Mb Activity
ENVIRONMENTAL
Operating Temperature
(gigabit data rates)
Operating Temperature
0 to 40°C
0 to 55°C
Green LED1 – 100Mb Activity
Green LED2 – 1Gb Activity
Orange LED3 – Link Activity
(10Mb and 100Mb data rates)
Storage Temperature
Humidity
-25 to +65°C
5 to 90%
POE
Blinking GREEN – Unit is ON
Active with No Load
Solid GREEN – Unit has
detected a valid IEEE802.3at
load
EMI
EN55022 Class A, FCC part 15 Class A
Blinking RED/GREEN – unit
has detected an invalid load
Solid RED – unit is in over-load
condition
Warranty
1 Year
Input/Output Connectors
RJ45
Input Connection
Pins: 1,2 7,8 GND / Pins: 3,6 4,5 +VIN
Output Connection
Pins: 1,2 GND / Pins: 3,6 +VIN
PHIHONG [ PHIHONG USA INC. ]
