POE16S-1AFG Characteristics
WWW.PHIHONG.COM
INPUT:
Input Source
Receives power from IEEE802.3at Midspan
Immunity
ESD EN61000-4-2 Level 3
RS EN61000-4-3 Level 3
Surge EN61000-4-5 Level 2
Input Detection
25K Detection IEEE802.3at compliance
Isolation (HI-POT)
2121VDC for 1 min, 10mA
DC Input Voltage Range
45VDC to 57VDC
Insulation Resistance
Input to Ground: >10M OHM 500VDC
Output to Ground: >10M OHM 500VDC
DC Input Current
1.0A at 45VDC and maximum load
2.0A at 50VDC and maximum load
0.8A at 57VDC and maximum load
FEATURES
Over Current Protection
For PoE Class 0-3 Detection on Output: 450mA
maximum
OUTPUT:
Total Output Power
19W with 33.6W PoE Input
For PoE Class 4 Detection on Output:650mA
maximum
Ripple and Noise (Vp-p)
Short Circuit Protection
250mV maximum
Outputs equipped with short circuit protection
The output can be shorted permanently without
damage
Output Detection
25K Detection IEEE802.3af compliance
Indicators
Efficiency
75% minimum at maximum load
Ethernet –
IN/OUT
Green LED1 and LED2 -
10Mb Activity
Green LED1 – 100Mb Activity
Green LED2 – 1Gb Activity
Orange LED3 – Link Activity
ENVIRONMENTAL
Operating Temperature
(gigabit data rates)
0 to 40°C
0 to 55°C
Operating Temperature
POE
Blinking GREEN – Unit is ON
Active with No Load
(10Mb and 100Mb data rates)
Storage Temperature
Humidity
-25 to +65°C
5 to 90%
Solid GREEN – Unit has
detected a valid
IEEE802.3af load
EMI
Blinking RED/GREEN – unit
has detected an invalid load
Solid RED – unit is in over-load
condition
EN55022 Class A, FCC part 15 Class A
Warranty
1 Year
Input/Output Connectors
RJ45
Input Connection
Pins: 1,2 7,8 GND / Pins: 3,6 4,5 +VIN
Output Connection
Pins: 1,2 GND / Pins: 3,6 +VIN
PHIHONG [ PHIHONG USA INC. ]
